How to connect smart lights

Please scan the QR Code, or get Smart Life downloaded from App Store or Android Market.

Choice 1 : Add Manually (Please turn on your phone's Wi-Fi network)

1.1 Add Device:
Click"+" to add a device. (Please turn on your phone Wi-Fi network)

1.2 Go to add the Smart Bulb(Add Manually)
Click "lighting button to choose Light Source (Wi-Fi) or Light Sorce (BLE+Wi-Fi)

1.3 Add the network:
Select 2.4GHz Wifi network and enter password.If network is 5GHz,
please switch to 2.4GHz network;
Retet the device via below 2 modes:

EZ Mode
Manually add lighting equipment and select WiFi connection;
Power on the bulb with power switch, and repeatedly, turn on-off-on-off-on the switch to activate the bulb into rapid blinking status.
Wait till the bulb rapidly blinks (about 0.5 second per blink).Click the confirmation button.
AP Mode
If the bulb can't be connected via EZ mode, try to click "AP mode" on the right corner of the top.
Power on the bulb with power switch.
When the bulb is rapidly blinking, then turn on - off- on - off - on the switch to ensure that light is slowly flashing. Click the confirmation button.

1.4 Add Device:
When adding device and scaning devices, please ensure the Wi-Fi is good ( or ensure the wifi is 2.4GHz network).
If the device connection is over time, please click "cancel" button,ensure that the network is 2.4GHz Wi-Fi network again, switch AP mode, and then restart the connection.

1.5 Add Device:
Register this device on Cloud and initialize the device, then connect successfully.

1.6 Add Device:
Once adding the device successfully, you can click the "Smart Bulb" to rename the device, and click the "Done" button to adjust the Smart Bulb

Choice 2 :Auto Scan (Please turn on your phone's Bluetooth and Wi-Fi)

2.1 Add Device:
Click "+" to add a device.

2.2 Go to Add the Smart Bulb(Auto Scan)
3.2.1 Recognize the smart bulb automatically, then click "Go to add" button to connect;(Bluetooth can auto scan the device)

2.3
Click "+" on the right side of "Bluetooth Device" to add Wi-Fi;

2.4
Connect the smart bulb by 2.4GHz Wi-Fi: Input Wi-Fi Name and Password.

2.5
When connecting the device, please place your router, mobile phone and device as close as possible;

2.6
The device is connected successfully, you can rename the device. Click the "Done" button to adjust the smart bulb.

Adjust the Smart Bulb:

Adjust the smart bulb color temperature:
Cold light and warm light;

Adjust the Light color (There are 160 thousands colors to change):
Brightness adjustment and saturation;

Multiple scene modes:
Night,Read, Working, Leisure, Soft, Colorful, Dazzling and Gorgeous. Click the "Edit" button to edit Scnce Name, Scene Color, Color Flash Mode, Color Flash Mode and Color Flash Speed then click "submit";

Voice recognition function :
Change colors according to the rhythm of the music.